BMW X5 e70 erori cutie

[Brataon]

Astăzi după ce am oprit la un stop a început cutia să nu mai schimbe corect am pus un tester și apar erorile din poza acum mă întreb ce ar putea fi daca mă poate ajuta cineva. Multumesc . Ca să înțelegeți cu cât o acceleram ea nu schimba sau in anumite momente mergeam constant pe pilot și ea dădea inferioare . Toate astea astăzi .

[RedCap]

CF37

4F92

BMW error code 4F92 on an E70 model indicates a transmission ratio monitoring fault, specifically related to clutch A-C. This often signifies an internal transmission issue, potentially involving a faulty mechatronic unit, clutch pack wear, or a pressure control issue. It can cause the transmission to enter limp mode, especially under load or uphill, and may result in hard shifting or jolts when stopping. 

 

Here's a more detailed breakdown:

Possible Causes:

• Internal Transmission Failure:

  This is the most common reason for a 4F92 error. It could involve wear and tear on clutch packs (specifically clutch A-C), or issues within the valve body. 

   
• Mechatronic Unit Problems:

  The mechatronic unit, which controls the transmission's hydraulic and electronic functions, may have a faulty solenoid, a pressure sensor, or a problem with the sleeve gasket. 

   
• Low or Degraded Transmission Fluid:

  Insufficient or degraded transmission fluid can affect pressure regulation and lead to errors. 

   
• Clogged Passages:

  Internal passages within the transmission could be clogged, restricting fluid flow and causing pressure-related issues. 

   
• Torque Converter Issues:

  While less common, a faulty torque converter can also contribute to ratio monitoring errors. 

   

Symptoms:

• Limp Mode: The transmission may go into a reduced-performance mode, often triggered by uphill driving or acceleration. 
   
• Hard Shifting: Difficulty shifting gears, especially from park to drive or neutral, or when stopping. 
   
• Jolts or Jerks: Shifting can be accompanied by noticeable jolts or jerks. 
   
• Check Transmission Light: The "Check Transmission" or "Service Engine Soon" light may illuminate. 
   

Troubleshooting Steps:

1. 1. Check Transmission Fluid:

   Inspect the fluid level and condition. If it's low or degraded, address it as a first step. 

    
2. 2. Scan for Codes:

   Use a diagnostic tool to read and clear the fault codes. Note any additional codes that may be present. 

    
3. 3. Mechatronic Inspection:

   If the problem persists, consider inspecting or replacing the mechatronic unit, including solenoids and the sleeve gasket. 

    
4. 4. Clutch Pack Assessment:

   If the problem is related to clutch packs, a transmission rebuild or replacement may be necessary. 

    
5. 5. Professional Diagnosis:

   Due to the complexity of the transmission system, it's often best to seek professional diagnosis and repair from a qualified BMW technician. 

    

4F85

Fault Code 4f85 | BimmerFest BMW Forum

[Brataon]

Mulțumesc frumos